DEEN
Magazin Humboldt Kosmos Newsroom Newsletter

Suche

Preise und Stipendien Recherche im Humboldt-Netzwerk

Suche nach Tags

Prof. Dr. Aleksander Gurlo

Profil

Derzeitige StellungProfessor W-3 und Äquivalente
FachgebietHerstellung und Eigenschaften von Funktionsmaterialien,Festkörper- und Oberflächenchemie, Materialsynthese
Keywordsceramics, additive manufacturing, materials inform, ZnO, aqueous chemical bath, crystal growth, defects

Aktuelle Kontaktadresse

LandDeutschland
OrtBerlin
Universität/InstitutionTechnische Universität Berlin
Institut/AbteilungInstitut für Werkstoffwissenschaften und -technologien
Websitewww.keramik.tu-berlin.de

Gastgeber*innen während der Förderung

Prof. Dr. David R. ClarkeSchool of Engineering and Applied Sciences, Harvard University, Cambridge
Beginn der ersten Förderung01.09.2010

Programm(e)

2010Feodor Lynen-Forschungsstipendien-Programm für erfahrene Forschende

Publikationen (Auswahl)

2026Jain, N. and Czasny, M. and Schmidt, J. and Santos, S.A. and Schmiedjell, D. and Hild, S. and Gurlo, A.: Improved fiber–matrix bonding of continuous aramid fiber reinforced acrylonitrile-styrene-acrylate polymer using in-situ impregnation material extrusion additive manufacturing technique. In: Composites Part A: Applied Science and Manufacturing, 200, 2026,
2025He, C. and Junge, P. and Kleba-Ehrhardt, R. and Goerke, O. and Rupprecht, C. and Gurlo, A. and Karl, D.: A novel approach to increase flowability of planetary regolith: {Spray} drying of {Martian} simulants for powder-based {ISRU} fabrication. In: Acta Astronautica, 236, 2025, 1101--1114
2025Kaba, Onur and Shah, Asma Tufail and Dudaško, Dominik and Jain, Nishant and Bertz, Tobias and Görke, Oliver and Gurlo, Aleksander: Additive manufacturing of a polyamide 12 and silica nanocomposite: {A} route for the reusability of a thermoplastic selective laser sintering powder. In: Polymer Composites, 46, 2025, 5964--5981
2025Jain, Nishant and Czasny, Mathias and Butzmann, Till and Kober, Delf and Karl, David and Schmiedjell, David and Hild, Sabine and Gurlo, Aleksander: Additive manufacturing of continuous regenerated cellulose fiber reinforced polylactic acid composites using in-situ impregnation material extrusion technique. In: Composites Part C: Open Access, 17, 2025, 100594
2025Jain, N. and Czasny, M. and Butzmann, T. and Kober, D. and Karl, D. and Schmiedjell, D. and Hild, S. and Gurlo, A.: Additive manufacturing of continuous regenerated cellulose fiber reinforced polylactic acid composites using in-situ impregnation material extrusion technique. In: Composites Part C: Open Access, 17, 2025,
2025Dal Molin, E.S. and Javed, M. and Brösigke, G. and Rudolph, M.A. and Repke, J.-U. and Schomäcker, R. and Simon, U. and Bekheet, M.F. and Gurlo, A.: Additively {Manufactured} {Zirconia}-{Supported} {Indium} {Oxide} {Catalysts} and {Their} {Performance} in {Direct} {Methanol} {Synthesis}. In: Industrial and Engineering Chemistry Research, 64, 2025, 1032--1045
2025Gonthier, J. and Scoppola, E. and Werner, P. and Gurlo, A. and Fratzl, P. and Wagermaier, W.: Correction to: {Plastic} deformation and heat-enabled structural recovery of monolithic silica aerogels ({Journal} of {Sol}-{Gel} {Science} and {Technology}, (2024), 111, 3, (1005-1020), 10.1007/s10971-024-06494-7). In: Journal of Sol-Gel Science and Technology, 113, 2025, 1001
2025Gili, A. and Kunz, M. and Gaissmaier, D. and Jung, C. and Jacob, T. and Lunkenbein, T. and Hetaba, W. and Dembélé, K. and Selve, S. and Schomäcker, R. and Gurlo, A. and Bekheet, M.F.: Discovery and {Characterization} of a {Metastable} {Cubic} {Interstitial} {Nickel}-{Carbon} {System} with an {Expanded} {Lattice}. In: ACS Nano, 19, 2025, 2769--2776
2025Kleba-Ehrhardt, R. and Jastram, B. and Heinze, C. and Gordei, A. and Gurlo, A. and Karl, D.: Effect of relative humidity on powder flowability and powder bed formation in additive manufacturing. In: Additive Manufacturing, 109, 2025,
2025Negendank, Maik and Jain, Nishant and Hanaor, Dorian and Gurlo, Aleksander and Mueller, Soeren: Effect of {Extrusion} {Processing} on {Mechanical} {Properties} of {Aluminum}/{Graphene} {Nanoplatelet} {Composites}. In: Journal of Materials Engineering and Performance, 34, 2025, 12138--12155
2025Chen, H. and Schmidt, B. and Gennett, A. and Kamm, P.H. and Gurlo, A. and Meyer, V. and Simon, U.: Extrusion-based additive manufacturing of complex three-dimensional ultra-lightweight materials using the basidiomycete {Fomes} fomentarius. In: Materials Advances, 6, 2025, 5149--5158
2025Kleba-Ehrhardt, Rafael and Dávila, Josué and Geissler, Johann and Mohr, Gunther and Schmidt, Johannes and Heinze, Christoph and Hilgenberg, Kai and Gurlo, Aleksander and Karl, David: Influence of {Haynes} 282 {Powder} {Oxidation} on {Powder} {Properties} and {Component} {Quality} in {Laser} {Powder} {Bed} {Fusion}. In: Additive Manufacturing, 2025, 105050
2025Winterstein, T.F. and Malleier, C. and Mohammadi, A. and Krüger, H. and Kahlenberg, V. and Venter, A.M. and Bekheet, M.F. and Müller, J.T. and Gurlo, A. and Heggen, M. and Penner, S.: Lanthanum nickel titanate perovskites as model systems for {Ni}-perovskite interfacial engineering in methane dry reforming. In: Materials Today Chemistry, 45, 2025,
2025Gili, Albert and Brösigke, Georg and Javed, Mudassar and Dal Molin, Emiliano and Isbrücker, Philipp and Repke, Jens‐Uwe and Hess, Franziska and Gurlo, Aleksander and Schomäcker, Reinhard and Bekheet, Maged F.: Leistung und {Stabilität} eines {Korund}‐{Typ}‐{In}$_{\textrm{2}}$ {O}$_{\textrm{3}}$ ‐{Katalysators} für die {Kohlendioxidhydrierung} zu {Methanol}. In: Angewandte Chemie, 137, 2025, e202416990
2025Amghar, N. and Ivorra-Martinez, J. and Perejón, A. and Hanaor, D. and Gurlo, A. and Ramírez-Rico, J. and Pérez-Maqueda, L.A. and Sánchez-Jimenez, P.E.: Microstructural control by freeze-casting of {CaO} architectures for improved and stable thermochemical energy storage performance. In: Journal of Energy Storage, 125, 2025,
2025Anchieta e Silva, Felipe and Marques, Eduardo do Espirito Santo and Fonseca, Fabio Coral and Gurlo, Aleksander and Rodrigues, Thenner Silva: Noble {Metal}-{Supported} {CeO} 2 {Catalysts} for {Hydrogen} {Production} via {Ethanol} {Steam} {Reforming}. In: CHEMCATCHEM, 2025,
2025Silva, Felipe Anchieta E and Marques, Eduardo Do Espírito Santo and Fonseca, Fabio Coral and Gurlo, Aleksander and Rodrigues, Thenner Silva: Noble {Metal}‐{Supported} {CeO}$_{\textrm{2}}$ {Catalysts} for {Hydrogen} {Production} via {Ethanol} {Steam} {Reforming}. In: ChemCatChem, 17, 2025, e70002
2025Pang, Shumin and Wu, Dongwei and Hanaor, Dorian A H and Haibel, Astrid and Kurreck, Jens and Gurlo, Aleksander: Osteomimetic bioceramic scaffolds with high-fidelity human-bone features produced by rotational printing. In: International Journal of Extreme Manufacturing, 7, 2025, 035005
2025Gili, Albert and Brösigke, Georg and Javed, Mudassar and Dal Molin, Emiliano and Isbrücker, Philipp and Repke, Jens‐Uwe and Hess, Franziska and Gurlo, Aleksander and Schomäcker, Reinhard and Bekheet, Maged F.: Performance and {Stability} of {Corundum}‐type {In}$_{\textrm{2}}$ {O}$_{\textrm{3}}$ {Catalyst} for {Carbon} {Dioxide} {Hydrogenation} to {Methanol}. In: Angewandte Chemie International Edition, 64, 2025, e202416990
2025Nejadsalim, Aidin and Bashiri, Najmeh and Bekheet, Maged F. and Rudolph, Maik Alexander and Müller, Julian Thomas and Schmidt, Johannes and Godini, Hamid Reza and Schomäcker, Reinhard and Thomas, Arne and Görke, Oliver and Gurlo, Aleksander: Performance {Enhancement} in {Pt}–{CeO}$_{\textrm{2}}$ @{SiO}$_{\textrm{2}}$ {Core}–{Sheath} {Nanofibers} in the {Dehydrogenation} of {Cycloalkanes} and {Alkanes}. In: ACS Applied Nano Materials, 8, 2025, 14307--14319
2025Yang, H. and Wang, X. and Praetz, S. and Pang, S. and Görke, O. and Bekheet, M.F. and Hanaor, D.A.H. and Gurlo, A.: Photolithographic additive manufacturing of high-entropy perovskite oxides from synthesized multimetallic polymeric precursors. In: Journal of the European Ceramic Society, 45, 2025,
2025Strasser, Andreas and Kober, Delf and Bekheet, Maged and Gurlo, Aleksander: Polymer-{Derived} {Ceramic} {Anodes} for {Rechargeable} {Zinc}-{Air} {Batteries}. Electrochemical {Society} {Meeting} {Abstracts} 248. The Electrochemical Society, Inc., 2025. 167--167
2025Brody, Leo and Bekheet, Maged F. and Yang, Kunran and Müller, Julian T. and Rukh, Mahe and Portillo, Sam and Schomäcker, Reinhard and Gili, Albert and Gurlo, Aleksander and Li, Fanxing: Reversible {Phase} {Transitions} {Enable} {Cyclic} {Isothermal} {CO}$_{\textrm{2}}$ {Capture} in {Redox}‐{Activated} {Perovskite}‐{Structured} {Sorbents}. In: Advanced Functional Materials, 35, 2025, 2504769
2025Chen, Huaiyou and Klemm, Sophie and Scoppola, Ernesto and Schmidt, Bertram and Wu, Yunpeng and Fleck, Claudia and Gurlo, Aleksander and Meyer, Vera and Freidank‐Pohl, Carsten and Simon, Ulla: Structural, {Mechanical}, and {Genetic} {Insights} into {Heat}‐{Pressed} \textit{{Fomes} {Fomentarius}} {Mycelium} from {Solid}‐{State} and {Liquid} {Cultivations}. In: Advanced Sustainable Systems, 9, 2025, e00484
2025Avcıoğlu, C. and Bekheet, M.F. and Avcıoğlu, S. and Kaya, F. and Kim, B.C. and Kaya, C. and Gurlo, A.: Unveiling the {Electrocatalytic} {Activity} of {Bifunctional} {Iron}-{Niobium} {Double} {Perovskites} for {Overall} {Water} {Splitting}: {A}-{Site} {Cation} {Influence}. In: Advanced Materials Interfaces, 12, 2025,
2025Avcıoğlu, C. and Kraus, P. and Avcıoğlu, S. and Müller, J.T. and Gurlo, A. and Bekheet, M.F.: Utilization of {Novel} ({KNbO3})1−x({Ba2FeNbO6})x (x = 0.1, 0.2, 0.3) {Solid} {Solutions} for {Efficient} {Photo}-{Assisted} {Fenton} {Degradation} of {Methylene} {Blue} {Dye}. In: Advanced Energy and Sustainability Research, 6, 2025,
2024Bekheet, M.F. and Schlicker, L. and Popescu, R. and Riedel, W. and Grünbacher, M. and Penner, S. and Gurlo, A.: A quantitative microscopic view on the gas-phase-dependent phase transformation from tetragonal to monoclinic {ZrO2}. In: Journal of the American Ceramic Society, 107, 2024, 5036--5050
2024Wu, D. and Pang, S. and Berg, J. and Mei, Y. and Ali, A.S.M. and Röhrs, V. and Tolksdorf, B. and Hagenbuchner, J. and Ausserlechner, M.J. and Deubzer, H.E. and Gurlo, A. and Kurreck, J.: Bioprinting of {Perfusable} {Vascularized} {Organ} {Models} for {Drug} {Development} via {Sacrificial}-{Free} {Direct} {Ink} {Writing}. In: Advanced Functional Materials, 34, 2024,
2024Avcıoğlu, C. and Gurlo, A. and Bekheet, M.F.: Enhanced {Photocatalytic} {Activity} of {Direct} {Z}-{Scheme} {K4Nb6O17}/{Carbon}-{Rich} {Melon} {Heterostructures}. In: Advanced Sustainable Systems, 8, 2024,
2024Mohammadi, A. and Thurner, C.W. and Haug, L. and Bekheet, M.F. and Müller, J.T. and Gurlo, A. and Hejny, C. and Nezhad, P.D.K. and Winkler, D. and Riedel, W. and Penner, S.: How defects in lanthanum iron manganite perovskite structures promote the catalytic reduction of {NO} by {CO}. In: Materials Today Chemistry, 35, 2024,
2024Bischoff, B. and Bekheet, M.F. and Dal Molin, E. and Praetz, S. and Kanngießer, B. and Schomäcker, R. and Etter, M. and Jeppesen, H.S. and Tayal, A. and Gurlo, A. and Gili, A.: In situ/operando plug-flow fixed-bed cell for synchrotron {PXRD} and {XAFS} investigations at high temperature, pressure, controlled gas atmosphere and ultra-fast heating. In: Journal of Synchrotron Radiation, 31, 2024, 77--84
2024Balkan, A. and Wang, X. and Gurlo, A.: Influence of {Si3N4} fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane. In: Science and Technology of Advanced Materials, 25, 2024,
2024Winterstein, T.F. and Malleier, C. and Klötzer, B. and Kahlenberg, V. and Hejny, C. and Bekheet, M.F. and Müller, J.T. and Gurlo, A. and Heggen, M. and Penner, S.: Molybdate-based double perovskite materials in methane dry reforming. In: Materials Today Chemistry, 41, 2024,
2024Gili, A. and Bekheet, M.F. and Thimm, F. and Bischoff, B. and Geske, M. and Konrad, M. and Praetz, S. and Schlesiger, C. and Selve, S. and Gurlo, A. and Rosowski, F. and Schomacker, R.: One-pot synthesis of iron-doped ceria catalysts for tandem carbon dioxide hydrogenation. In: Catalysis Science and Technology, 14, 2024, 4174--4186
2024Gonthier, J. and Scoppola, E. and Rilling, T. and Gurlo, A. and Fratzl, P. and Wagermaier, W.: Solvent {Cavitation} during {Ambient} {Pressure} {Drying} of {Silica} {Aerogels}. In: Langmuir, 40, 2024, 12925--12938
2024Jain, N. and Schmidt, J. and Görke, O. and Karl, D. and Gurlo, A. and Schmidt, F.: Surface modification of bioactive glasses for successful incorporation with poly(lactic-co-glycolic acid) ({PLGA}). In: RSC Applied Interfaces, 1, 2024, 748--758
2024Yang, H. and Chen, G. and Ni, J. and Praetz, S. and Kober, D. and Cuello, G. and Dal Molin, E. and Gili, A. and Schlesiger, C. and Bekheet, M.F. and Hanaor, D.A.H. and Gurlo, A.: Synthesis and {Electrochemical} {Performance} of {High}-{Entropy} {Spinel}-{Type} {Oxides} {Derived} from {Multimetallic} {Polymeric} {Precursors}. In: Advanced Energy and Sustainability Research, 5, 2024,
2024Guo, W. and Wang, J. and Gurlo, A. and Bekheet, M.F.: Tin–containing {Silicon} {Oxycarbonitride} {Ceramic} {Nanocomposites} as {Stable} {Anode} for {Magnesium} {Ion} {Batteries}. In: Batteries and Supercaps, 7, 2024,
2023Pang, S. and Wu, D. and Gurlo, A. and Kurreck, J. and Hanaor, D.A.H.: Additive manufacturing and performance of bioceramic scaffolds with different hollow strut geometries. In: Biofabrication, 15, 2023,
2023Woo, C. and Raffel, Y. and Olivo, R. and Seidel, K. and Gurlo, A.: An experimental comparison of interface trap density in hafnium oxide-based {FeFETs}. In: Memories - Materials, Devices, Circuits and Systems, 6, 2023,
2023Huang, Y. and Chen, Y. and Xu, M. and Ly, A. and Gili, A. and Murphy, E. and Asset, T. and Liu, Y. and De Andrade, V. and Segre, C.U. and Deriy, A.L. and De Carlo, F. and Kunz, M. and Gurlo, A. and Pan, X. and Atanassov, P. and Zenyuk, I.V.: Catalysts by pyrolysis: {Transforming} metal-organic frameworks ({MOFs}) precursors into metal-nitrogen-carbon ({M}-{N}-{C}) materials. In: Materials Today, 69, 2023, 66--78
2023Karacasulu, L. and Karl, D. and Gurlo, A. and Vakifahmetoglu, C.: Cold sintering as a promising {ISRU} technique: {A} case study of {Mars} regolith simulant. In: Icarus, 389, 2023,
2023Nejadsalim, A. and Bashiri, N. and Godini, H.R. and Oliveira, R.L. and Tufail Shah, A. and Bekheet, M.F. and Thomas, A. and Schomäcker, R. and Gurlo, A. and Görke, O.: Core-{Sheath} {Pt}-{CeO2}/{Mesoporous} {SiO2} {Electrospun} {Nanofibers} as {Catalysts} for the {Reverse} {Water} {Gas} {Shift} {Reaction}. In: Nanomaterials, 13, 2023,
2023Pang, S. and Wu, D. and Yang, H. and Kamutzki, F. and Kurreck, J. and Gurlo, A. and Hanaor, D.A.H.: Enhanced mechanical performance and bioactivity in strontium/copper co-substituted diopside scaffolds. In: Biomaterials Advances, 145, 2023,
2023Nejadsalim, A. and Godini, H.R. and Ramesh Kumar, S. and Gallucci, F. and Kober, D. and Gurlo, A. and Görke, O.: Hydrogenation of {Carbon} {Dioxide} to {Dimethyl} {Ether} on {CuO}–{ZnO}/{ZSM}-5 {Catalysts}: {Comparison} of {Powder} and {Electrospun} {Structures}. In: Materials, 16, 2023,
2023Gonthier, J. and Rilling, T. and Scoppola, E. and Zemke, F. and Gurlo, A. and Fratzl, P. and Wagermaier, W.: In {Operando} μ{CT} {Imaging} of {Silylated} {Silica} {Aerogels} during {Ambient} {Pressure} {Drying} and {Spring}-{Back}. In: Chemistry of Materials, 35, 2023, 7683--7693
2023Karl, D. and Cannon, K.M. and Gurlo, A.: Leaching of {Lunar} {Regolith} for {Synthetic} {Phyllosilicates} on the {Moon}. . 2023. 291--297
2023Kamutzki, F. and Schneider, S. and Müller, J.T. and Barowski, J. and Klimm, D. and Gurlo, A. and Hanaor, D.A.H.: Low-{Temperature} {Sintering} of {Low}-{Loss} {Millimeter}-{Wave} {Dielectric} {Ceramics} {Based} on {Li}-{Kosmochlor}, {LiCrSi2O6}. In: Physica Status Solidi (A) Applications and Materials Science, 220, 2023,
2023Guo, W. and Icin, O. and Vakifahmetoglu, C. and Kober, D. and Gurlo, A. and Bekheet, M.F.: Magnesium-{Ion} {Battery} {Anode} from {Polymer}-{Derived} {SiOC} {Nanobeads}. In: Advanced Functional Materials, 33, 2023,
2023Yalçınyüz, B.A. and Kamutzki, F. and Gurlo, A. and Rupprecht, C.: Optimization of {Segmented} {Thermal} {Barrier} {Coatings} (s-{TBCs}) for {High}-{Temperature} {Applications}. In: Journal of Thermal Spray Technology, 32, 2023, 2636--2646
2023Zemke, F. and Gonthier, J. and Scoppola, E. and Simon, U. and Bekheet, M.F. and Wagermaier, W. and Gurlo, A.: Origin of the {Springback} {Effect} in {Ambient}-{Pressure}-{Dried} {Silica} {Aerogels}: {The} {Effect} of {Surface} {Silylation}. In: Gels, 9, 2023,
2023Avcıoǧlu, C. and Avcıoǧlu, S. and Bekheet, M.F. and Gurlo, A.: Photocatalytic {Overall} {Water} {Splitting} by {SrTiO3}: {Progress} {Report} and {Design} {Strategies}. In: ACS Applied Energy Materials, 6, 2023, 1134--1154
2023Haug, L. and Thurner, C. and Bekheet, M.F. and Ploner, K. and Bischoff, B. and Gurlo, A. and Kunz, M. and Sartory, B. and Penner, S. and Klötzer, B.: Pivotal {Role} of {Ni}/{ZrO2} {Phase} {Boundaries} for {Coke}-{Resistant} {Methane} {Dry} {Reforming} {Catalysts}. In: Catalysts, 13, 2023,
2023Ovsianytskyi, O. and Bekheet, M.F. and Gili, A. and Gurlo, A.: Revealing the {Chemical} {State} of {Palladium} in {Operating} {In2O3} {Gas} {Sensors}: {Metallic} {Pd} {Enhances} {Sensing} {Response} and {Intermetallic} {InxPdy} {Compound} {Blocks} {It}. In: ChemPhysChem, 24, 2023,
2023Zemke, F. and Scoppola, E. and Simon, U. and Bekheet, M.F. and Wagermaier, W. and Gurlo, A.: Springback effect of ambient-pressure-dried silica aerogels: nanoscopic effects of silylation revealed by in situ synchrotron {X}-ray scattering. In: Nanoscale Advances, 6, 2023, 111--125
2023Yang, H. and Klemm, S. and Müller, J. and Bekheet, M.F. and Gurlo, A. and Hanaor, D.A.H.: Synthesis of high-entropy carbides from multi-metal polymer precursors. In: Journal of the European Ceramic Society, 43, 2023, 4233--4243
2023Ozalp, V.C. and Ucak, S. and Dursun, A.D. and Sudagidan, M. and Icin, O. and Vakifahmetoglu, C. and Henning, L.M. and Simon, U. and Gurlo, A.: Targeted multidrug delivery systems to kill antibiotic-resistant {Staphylococcus} aureus. In: Journal of Drug Delivery Science and Technology, 86, 2023,
2023Franke-Lang, R. and Hilger, A. and Manke, I. and Zavareh, S. and Bekheet, M.F. and Gurlo, A. and Kowal, J.: {3D} {Multiscale} {Lithium}-{Ion} {Cell} {Modeling} for {LiFePO4} {Freeze}-{Casted} {Electrode} {Structures} {Using} {Synchrotron} {X}-{Ray} and {FIB}/{SEM} {Tomography}. In: Advanced Theory and Simulations, 6, 2023,
2023Kamutzki, F. and Bekheet, M.F. and Selve, S. and Kampmann, F. and Siemensmeyer, K. and Kober, D. and Gillen, R. and Wagner, M. and Maultzsch, J. and Gurlo, A. and Hanaor, D.A.H.: {NaGdSi2O6} – {A} novel antiferromagnetically coupled silicate with {Vierer} chain structure. In: Journal of Solid State Chemistry, 317, 2023,
2022Kamutzki, F. and Bekheet, M.F. and Schneider, S. and Gurlo, A. and Hanaor, D.A.H.: A comparison of syntheses approaches towards functional polycrystalline silicate ceramics. In: Open Ceramics, 9, 2022,
2022Cao, P. and Tang, P. and Bekheet, M.F. and Du, H. and Yang, L. and Haug, L. and Gili, A. and Bischoff, B. and Gurlo, A. and Kunz, M. and Dunin-Borkowski, R.E. and Penner, S. and Heggen, M.: Atomic-{Scale} {Insights} into {Nickel} {Exsolution} on {LaNiO3} {Catalysts} via {In} {Situ} {Electron} {Microscopy}. In: Journal of Physical Chemistry C, 126, 2022, 786--796
2022Chen, Q. and Schmidt, F. and Görke, O. and Asif, A. and Weinhold, J. and Aghaei, E. and Ur Rehman, I. and Gurlo, A. and Shah, A.T.: Ceramic {Stereolithography} of {Bioactive} {Glasses}: {Influence} of {Resin} {Composition} on {Curing} {Behavior} and {Green} {Body} {Properties}. In: Biomedicines, 10, 2022,
2022Henning, L.M. and Simon, U. and Abdullayev, A. and Schmidt, B. and Pohl, C. and Nunez Guitar, T. and Vakifahmetoglu, C. and Meyer, V. and Bekheet, M.F. and Gurlo, A.: Effect of {Fomes} fomentarius {Cultivation} {Conditions} on {Its} {Adsorption} {Performance} for {Anionic} and {Cationic} {Dyes}. In: ACS Omega, 7, 2022, 4158--4169
2022Delir Kheyrollahi Nezhad, P. and Bekheet, M.F. and Bonmassar, N. and Gili, A. and Kamutzki, F. and Gurlo, A. and Doran, A. and Schwarz, S. and Bernardi, J. and Praetz, S. and Niaei, A. and Farzi, A. and Penner, S.: Elucidating the role of earth alkaline doping in perovskite-based methane dry reforming catalysts. In: Catalysis Science and Technology, 12, 2022, 1229--1244
2022Abdullayev, A. and Avcioglu, C. and Fey, T. and Hilger, A. and Osenberg, M. and Manke, I. and Henning, L.M. and Gurlo, A. and Bekheet, M.F.: Fabrication and characterization of porous mullite ceramics derived from fluoride-assisted {Metakaolin}-{Al}({OH})3 annealing for filtration applications. In: Open Ceramics, 9, 2022,
2022Henning, L.M. and Müller, J.T. and Smales, G.J. and Pauw, B.R. and Schmidt, J. and Bekheet, M.F. and Gurlo, A. and Simon, U.: Hierarchically porous and mechanically stable monoliths from ordered mesoporous silica and their water filtration potential. In: Nanoscale Advances, 4, 2022, 3892--3908
2022Pang, S. and Wu, D. and Kamutzki, F. and Kurreck, J. and Gurlo, A. and Hanaor, D.A.H.: High performing additively manufactured bone scaffolds based on copper substituted diopside. In: Materials and Design, 215, 2022,
2022Li, X. and Simon, U. and Bekheet, M.F. and Gurlo, A.: Mineral-{Supported} {Photocatalysts}: {A} {Review} of {Materials}, {Mechanisms} and {Environmental} {Applications}. In: Energies, 15, 2022,
2022Wang, J. and Grünbacher, M. and Penner, S. and Bekheet, M.F. and Gurlo, A.: Porous {Silicon} {Oxycarbonitride} {Ceramics} with {Palladium} and {Pd2Si} {Nanoparticles} for {Dry} {Reforming} of {Methane}. In: Polymers, 14, 2022,
2022Guo, W. and Hanaor, D.A.H. and Kober, D. and Wang, J. and Bekheet, M.F. and Gurlo, A.: Rechargeable {Magnesium} {Ion} {Batteries} {Based} on {Nanostructured} {Tungsten} {Disulfide} {Cathodes}. In: Batteries, 8, 2022,
2022Hu, D. and Shao, G. and Wang, J. and Gurlo, A. and Bekheet, M.F.: Revealing {Nanodomain} {Structures} of {Bottom}-{Up}-{Fabricated} {Graphene}-{Embedded} {Silicon} {Oxycarbide} {Ceramics}. In: Polymers, 14, 2022,
2022Karl, D. and Cannon, K.M. and Gurlo, A.: Review of space resources processing for {Mars} missions: {Martian} simulants, regolith bonding concepts and additive manufacturing. In: Open Ceramics, 9, 2022,
2022Avcıoğlu, C. and Avcıoğlu, S. and Bekheet, M.F. and Gurlo, A.: Solar hydrogen generation using niobium-based photocatalysts: design strategies, progress, and challenges. In: Materials Today Energy, 24, 2022,
2022Zemke, F. and Scoppola, E. and Simon, U. and Bekheet, M.F. and Wagermaier, W. and Gurlo, A.: Springback effect and structural features during the drying of silica aerogels tracked by in-situ synchrotron {X}-ray scattering. In: Scientific Reports, 12, 2022,
2022Wang, J. and Kober, D. and Shao, G. and Epping, J.D. and Görke, O. and Li, S. and Gurlo, A. and Bekheet, M.F.: Stable anodes for lithium-ion batteries based on tin-containing silicon oxycarbonitride ceramic nanocomposites. In: Materials Today Energy, 26, 2022,
2022Haug, L. and Thurner, C. and Bekheet, M.F. and Bischoff, B. and Gurlo, A. and Kunz, M. and Sartory, B. and Penner, S. and Klötzer, B.: Zirconium {Carbide} {Mediates} {Coke}-{Resistant} {Methane} {Dry} {Reforming} on {Nickel}-{Zirconium} {Catalysts}. In: Angewandte Chemie - International Edition, 61, 2022,
2022Wang, A.Y.-T. and Mahmoud, M.S. and Czasny, M. and Gurlo, A.: {CrabNet} for {Explainable} {Deep} {Learning} in {Materials} {Science}: {Bridging} the {Gap} {Between} {Academia} and {Industry}. In: Integrating Materials and Manufacturing Innovation, 11, 2022, 41--56
2021Peeples, C.A. and Kober, D. and Schmitt, F.-J. and Tholen, P. and Siemensmeyer, K. and Halldorson, Q. and Çoşut, B. and Gurlo, A. and Yazaydin, A.O. and Hanna, G. and Yücesan, G.: A {3D} {Cu}-{Naphthalene}-{Phosphonate} {Metal}–{Organic} {Framework} with {Ultra}-{High} {Electrical} {Conductivity}. In: Advanced Functional Materials, 31, 2021,
2021Baesso, I. and Karl, D. and Spitzer, A. and Gurlo, A. and Günster, J. and Zocca, A.: Characterization of powder flow behavior for additive manufacturing. In: Additive Manufacturing, 47, 2021,
2021El-Maghrabi, H.H. and Nada, A.A. and Bekheet, M.F. and Roualdes, S. and Riedel, W. and Iatsunskyi, I. and Coy, E. and Gurlo, A. and Bechelany, M.: Coaxial nanofibers of nickel/gadolinium oxide/nickel oxide as highly effective electrocatalysts for hydrogen evolution reaction. In: Journal of Colloid and Interface Science, 587, 2021, 457--466
2021Negendank, M. and Faezi, H.R. and Ovsianytskyi, O. and Goerke, O. and Gurlo, A. and Müller, S.: Extrusion and characterization of aluminum/graphene composites. . 2021.
2021Chen, H. and Abdullayev, A. and Bekheet, M.F. and Schmidt, B. and Regler, I. and Pohl, C. and Vakifahmetoglu, C. and Czasny, M. and Kamm, P.H. and Meyer, V. and Gurlo, A. and Simon, U.: Extrusion-based additive manufacturing of fungal-based composite materials using the tinder fungus {Fomes} fomentarius. In: Fungal Biology and Biotechnology, 8, 2021,
2021Nezhad, P.D.K. and Bekheet, M.F. and Bonmassar, N. and Schlicker, L. and Gili, A. and Kamutzki, F. and Gurlo, A. and Doran, A. and Gao, Y. and Heggen, M. and Schwarz, S. and Bernardi, J. and Niaei, A. and Farzi, A. and Klötzer, B. and Penner, S.: Mechanistic in situ insights into the formation, structural and catalytic aspects of the {La2NiO4} intermediate phase in the dry reforming of methane over {Ni}-based perovskite catalysts. In: Applied Catalysis A: General, 612, 2021,
2021Vakifahmetoglu, C. and Semerci, T. and Gurlo, A. and Soraru, G.D.: Polymer derived ceramic aerogels. In: Current Opinion in Solid State and Materials Science, 25, 2021,
2021Henning, L.M. and Abdullayev, A. and Vakifahmetoglu, C. and Simon, U. and Bensalah, H. and Gurlo, A. and Bekheet, M.F.: Review on {Polymeric}, {Inorganic}, and {Composite} {Materials} for {Air} {Filters}: {From} {Processing} to {Properties}. In: Advanced Energy and Sustainability Research, 2, 2021,
2021Kamutzki, F. and Schneider, S. and Barowski, J. and Gurlo, A. and Hanaor, D.A.H.: Silicate dielectric ceramics for millimetre wave applications. In: Journal of the European Ceramic Society, 41, 2021, 3879--3894
2021Wang, J. and Gili, A. and Grünbacher, M. and Praetz, S. and Epping, J.D. and Görke, O. and Schuck, G. and Penner, S. and Schlesiger, C. and Schomäcker, R. and Gurlo, A. and Bekheet, M.F.: Silicon oxycarbonitride ceramic containing nickel nanoparticles: {From} design to catalytic application. In: Materials Advances, 2, 2021, 1715--1730
2021Ploner, K. and Delir Kheyrollahi Nezhad, P. and Watschinger, M. and Schlicker, L. and Bekheet, M.F. and Gurlo, A. and Gili, A. and Doran, A. and Schwarz, S. and Stöger-Pollach, M. and Bernardi, J. and Armbrüster, M. and Klötzer, B. and Penner, S.: Steering the methanol steam reforming performance of {Cu}/{ZrO2} catalysts by modification of the {Cu}-{ZrO2} interface dimensions resulting from {Cu} loading variation. In: Applied Catalysis A: General, 623, 2021,
2021Ploner, K. and Doran, A. and Kunz, M. and Gili, A. and Gurlo, A. and Köwitsch, N. and Armbrüster, M. and Bernardi, J. and Watschinger, M. and Penner, S.: Steering the methanol steam reforming reactivity of intermetallic {Cu}-{In} compounds by redox activation: {Stability}: vs. formation of an intermetallic compound-oxide interface. In: Catalysis Science and Technology, 11, 2021, 5518--5533
2021Bekheet, M.F. and Delir Kheyrollahi Nezhad, P. and Bonmassar, N. and Schlicker, L. and Gili, A. and Praetz, S. and Gurlo, A. and Doran, A. and Gao, Y. and Heggen, M. and Niaei, A. and Farzi, A. and Schwarz, S. and Bernardi, J. and Klötzer, B. and Penner, S.: Steering the {Methane} {Dry} {Reforming} {Reactivity} of {Ni}/{La2O3Catalysts} by {Controlled} in {Situ} {Decomposition} of {Doped} {La2NiO4Precursor} {Structures}. In: ACS Catalysis, 11, 2021, 43--59
2021Karl, D. and Gurlo, A.: Synthetic {H2O} {Weathering} of {Simple} {Feldspar} {Lunar} {Regolith} {Simulants} {Aiming} to {Build} {High} {Strength} {Sandcastles} {Using} {Fusion} {Drying}. . 2021. 958--969
2021Ploner, K. and Delir Kheyrollahi Nezhad, P. and Gili, A. and Kamutzki, F. and Gurlo, A. and Doran, A. and Cao, P. and Heggen, M. and Köwitsch, N. and Armbrüster, M. and Watschinger, M. and Klötzer, B. and Penner, S.: The sol-gel autocombustion as a route towards highly {CO2}-selective, active and long-term stable {Cu}/{ZrO2methanol} steam reforming catalysts. In: Materials Chemistry Frontiers, 5, 2021, 5093--5105
2021Abdullayev, A. and Klimm, D. and Kamutzki, F. and Gurlo, A. and Bekheet, M.F.: {AlF3}-assisted flux growth of mullite whiskers and their application in fabrication of porous mullite-alumina monoliths. In: Open Ceramics, 7, 2021,
2020Bensalah, H. and Younssi, S.A. and Ouammou, M. and Gurlo, A. and Bekheet, M.F.: Azo dye adsorption on an industrial waste-transformed hydroxyapatite adsorbent: {Kinetics}, isotherms, mechanism and regeneration studies. In: Journal of Environmental Chemical Engineering, 8, 2020,
2020Köpfle, N. and Ploner, K. and Lackner, P. and Götsch, T. and Thurner, C. and Carbonio, E. and Hävecker, M. and Knop-Gericke, A. and Schlicker, L. and Doran, A. and Kober, D. and Gurlo, A. and Willinger, M. and Penner, S. and Schmid, M. and Klötzer, B.: Carbide-modified pd on zro2 as active phase for co2-reforming of methane—a model phase boundary approach. In: Catalysts, 10, 2020, 1--29
2020Karl, D. and Duminy, T. and Lima, P. and Kamutzki, F. and Gili, A. and Zocca, A. and Günster, J. and Gurlo, A.: Clay in situ resource utilization with {Mars} global simulant slurries for additive manufacturing and traditional shaping of unfired green bodies. In: Acta Astronautica, 174, 2020, 241--253
2020Wang, J. and Schölch, V. and Görke, O. and Schuck, G. and Wang, X. and Shao, G. and Schorrb, S. and Bekheet, M.F. and Gurlo, A.: Erratum to “{Metal}-containing ceramic nanocomposites synthesized from metal acetates and polysilazane” [{Open} {Ceram}. 1 (2020) 100001]({S2666539520300018})(10.1016/j.oceram.2020.100001). In: Open Ceramics, 3, 2020,
2020Abdullayev, A. and Kamm, P.H. and Bekheet, M.F. and Gurlo, A.: Fabrication and characterization of ice templated membrane supports from {Portland} cement. In: Membranes, 10, 2020,
2020Wang, X. and Schmidt, F. and Gurlo, A.: Fabrication of polymer-derived ceramics with hierarchical porosities by freeze casting assisted by thiol-ene click chemistry and {HF} etching. In: Journal of the European Ceramic Society, 40, 2020, 315--323
2020Shao, G. and Hanaor, D.A.H. and Shen, X. and Gurlo, A.: Freeze {Casting}: {From} {Low}-{Dimensional} {Building} {Blocks} to {Aligned} {Porous} {Structures}—{A} {Review} of {Novel} {Materials}, {Methods}, and {Applications}. In: Advanced Materials, 32, 2020,
2020Aghaei, E. and Karimzadeh, R. and Godini, H.R. and Gurlo, A. and Gorke, O.: Improving the physicochemical properties of {Y} zeolite for catalytic cracking of heavy oil via sequential steam-alkali-acid treatments. In: Microporous and Mesoporous Materials, 294, 2020,
2020Bonmassar, N. and Bekheet, M.F. and Schlicker, L. and Gili, A. and Gurlo, A. and Doran, A. and Gao, Y. and Heggen, M. and Bernardi, J. and Klötzer, B. and Penner, S.: In {Situ}-{Determined} {Catalytically} {Active} {State} of {LaNiO3} in {Methane} {Dry} {Reforming}. In: ACS Catalysis, 10, 2020, 1102--1112
2020Abdullayev, A. and Zemke, F. and Gurlo, A. and Bekheet, M.F.: Low-temperature fluoride-assisted synthesis of mullite whiskers. In: RSC Advances, 10, 2020, 31180--31186
2020Wang, A.Y.-T. and Murdock, R.J. and Kauwe, S.K. and Oliynyk, A.O. and Gurlo, A. and Brgoch, J. and Persson, K.A. and Sparks, T.D.: Machine {Learning} for {Materials} {Scientists}: {An} {Introductory} {Guide} toward {Best} {Practices}. In: Chemistry of Materials, 32, 2020, 4954--4965
2020Ploner, K. and Watschinger, M. and Kheyrollahi Nezhad, P.D. and Götsch, T. and Schlicker, L. and Köck, E.-M. and Gurlo, A. and Gili, A. and Doran, A. and Zhang, L. and Köwitsch, N. and Armbrüster, M. and Vanicek, S. and Wallisch, W. and Thurner, C. and Klötzer, B. and Penner, S.: Mechanistic insights into the catalytic methanol steam reforming performance of {Cu}/{ZrO2} catalysts by in situ and operando studies. In: Journal of Catalysis, 391, 2020, 497--512
2020Wang, J. and Schölch, V. and Görke, O. and Schuck, G. and Wang, X. and Shao, G. and Schorr, S. and Bekheet, M.F. and Gurlo, A.: Metal-containing ceramic nanocomposites synthesized from metal acetates and polysilazane. In: Open Ceramics, 1, 2020,
2020Shao, G. and Ovsianytskyi, O. and Bekheet, M.F. and Gurlo, A.: On-chip assembly of {3D} graphene-based aerogels for chemiresistive gas sensing. In: Chemical Communications, 56, 2020, 450--453
2020Shao, G. and Hanaor, D.A.H. and Wang, J. and Kober, D. and Li, S. and Wang, X. and Shen, X. and Bekheet, M.F. and Gurlo, A.: Polymer-{Derived} {SiOC} {Integrated} with a {Graphene} {Aerogel} {As} a {Highly} {Stable} {Li}-{Ion} {Battery} {Anode}. In: ACS applied materials \& interfaces, 12, 2020, 46045--46056
2020Karl, D. and Kamutzki, F. and Lima, P. and Gili, A. and Duminy, T. and Zocca, A. and Günster, J. and Gurlo, A.: Sintering of ceramics for clay in situ resource utilization on {Mars}. In: Open Ceramics, 3, 2020,
2019Wang, X. and Schmidt, F. and Hanaor, D. and Kamm, P.H. and Li, S. and Gurlo, A.: Additive manufacturing of ceramics from preceramic polymers: {A} versatile stereolithographic approach assisted by thiol-ene click chemistry. In: Additive Manufacturing, 27, 2019, 80--90
2019Gili, A. and Bischoff, B. and Simon, U. and Schmidt, F. and Kober, D. and Görke, O. and Bekheet, M.F. and Gurlo, A.: Ceria-based dual-phase membranes for high-temperature carbon dioxide separation: {Effect} of iron doping and pore generation with {MgO} template. In: Membranes, 9, 2019,
2019Götsch, T. and Köpfle, N. and Grünbacher, M. and Bernardi, J. and Carbonio, E.A. and Hävecker, M. and Knop-Gericke, A. and Bekheet, M.F. and Schlicker, L. and Doran, A. and Gurlo, A. and Franz, A. and Klötzer, B. and Penner, S.: Crystallographic and electronic evolution of lanthanum strontium ferrite ({La0}.{6Sr0}.{4FeO3}-:δ) thin film and bulk model systems during iron exsolution. In: Physical Chemistry Chemical Physics, 21, 2019, 3781--3794
2019Karl, D. and Jastram, B. and Kamm, P.H. and Schwandt, H. and Gurlo, A. and Schmidt, F.: Evaluating porous polylactide-co-glycolide/bioactive glass composite microsphere powders for laser sintering of scaffolds. In: Powder Technology, 354, 2019, 289--300
2019Nada, A.A. and Bekheet, M.F. and Roualdes, S. and Gurlo, A. and Ayral, A.: Functionalization of {MCM}-41 with titanium oxynitride deposited via {PECVD} for enhanced removal of methylene blue. In: Journal of Molecular Liquids, 274, 2019, 505--515
2019Henning, L.M. and Simon, U. and Gurlo, A. and Smales, G.J. and Bekheet, M.F.: Grafting and stabilization of ordered mesoporous silica {COK}-12 with graphene oxide for enhanced removal of methylene blue. In: RSC Advances, 9, 2019, 36271--36284
2019Henning, L.M. and Cubas, D.D. and Colmenares, M.G. and Schmidt, J. and Bekheet, M.F. and Pauw, B.R. and Gurlo, A. and Simon, U.: High specific surface area ordered mesoporous silica {COK}-12 with tailored pore size. In: Microporous and Mesoporous Materials, 280, 2019, 133--143
2019Sparks, T.D. and Gurlo, A. and Bekheet, M.F. and Gaultois, M.W. and Cherkashinin, G. and Laversenne, L. and Clarke, D.R.: High-temperature structure of {Co3} {O4}: {Understanding} spinel inversion using in situ and ex situ measurements. In: Physical Review B, 99, 2019,
2019Ilyas, K. and Zahid, S. and Batool, M. and Chaudhry, A.A. and Jamal, A. and Iqbal, F. and Nawaz, M.H. and Goerke, O. and Gurlo, A. and Shah, A.T. and Rehman, I.U.: In-vitro investigation of graphene oxide reinforced bioactive glass ceramics composites. In: Journal of Non-Crystalline Solids, 505, 2019, 122--130
2019Czasny, M. and Goerke, O. and Kaba, O. and Koerber, S. and Schmidt, F. and Gurlo, A.: Influence of composition on mechanical properties of additively manufactured composites reinforced with endless carbon fibers. . 2019. 335--340
2019Abdullayev, A. and Bekheet, M.F. and Hanaor, D.A.H. and Gurlo, A.: Materials and applications for low-cost ceramic membranes. In: Membranes, 9, 2019,
2019Bekheet, M.F. and Grünbacher, M. and Schlicker, L. and Gili, A. and Doran, A. and Epping, J.D. and Gurlo, A. and Klötzer, B. and Penner, S.: On the structural stability of crystalline ceria phases in undoped and acceptor-doped ceria materials under in situ reduction conditions. In: CrystEngComm, 21, 2019, 145--154
2019Ploner, K. and Schlicker, L. and Gili, A. and Gurlo, A. and Doran, A. and Zhang, L. and Armbrüster, M. and Obendorf, D. and Bernardi, J. and Klötzer, B. and Penner, S.: Reactive metal-support interaction in the {Cu}-{In2O3} system: intermetallic compound formation and its consequences for {CO2}-selective methanol steam reforming. In: Science and Technology of Advanced Materials, 20, 2019, 356--366
2019Schlicker, L. and Popescu, R. and Bekheet, M.F. and Doran, A. and Gerthsen, D. and Gurlo, A.: Real-time direct transmission electron microscopy imaging of phase and morphology transformation from solid indium oxide hydroxide to hollow corundum-type indium oxide nanocrystallites. In: Nanoscale, 11, 2019, 12242--12249
2019Gili, A. and Schlicker, L. and Bekheet, M.F. and Görke, O. and Kober, D. and Simon, U. and Littlewood, P. and Schomäcker, R. and Doran, A. and Gaissmaier, D. and Jacob, T. and Selve, S. and Gurlo, A.: Revealing the {Mechanism} of {Multiwalled} {Carbon} {Nanotube} {Growth} on {Supported} {Nickel} {Nanoparticles} by in {Situ} {Synchrotron} {X}-ray {Diffraction}, {Density} {Functional} {Theory}, and {Molecular} {Dynamics} {Simulations}. In: ACS Catalysis, 9, 2019, 6999--7011
2019Götsch, T. and Köpfle, N. and Schlicker, L. and Carbonio, E.A. and Hävecker, M. and Knop-Gericke, A. and Schlögl, R. and Bekheet, M.F. and Gurlo, A. and Doran, A. and Bernardi, J. and Klötzer, B. and Penner, S.: Treading in the limited stability regime of lanthanum strontium ferrite - {Reduction}, phase change and exsolution. . 2019. 1771--1781
2019Shakibi Nia, N. and Hauser, D. and Schlicker, L. and Gili, A. and Doran, A. and Gurlo, A. and Penner, S. and Kunze-Liebhäuser, J.: Zirconium {Oxycarbide}: {A} {Highly} {Stable} {Catalyst} {Material} for {Electrochemical} {Energy} {Conversion}. In: ChemPhysChem, 20, 2019, 3067--3073
2018Colmenares, M.G. and Simon, U. and Cruz, O. and Thomas, A. and Goerke, O. and Gurlo, A.: Batch and continuous synthesis upscaling of powder and monolithic ordered mesoporous silica {COK}-12. In: Microporous and Mesoporous Materials, 256, 2018, 102--110
2018Bahrami, A. and Soltani, N. and Pech-Canul, M.I. and Soltani, S. and González, L.A. and Gutiérrez, C.A. and Tapp, J. and Möller, A. and Gurlo, A.: Bilayer graded {Al}/{B4C}/rice husk ash composite: {Wettability} behavior, thermo-mechanical, and electrical properties. In: Journal of Composite Materials, 52, 2018, 3745--3758
2018Fröhlich, K. and Hartzke, D. and Schmidt, F. and Eucker, J. and Gurlo, A. and Sittinger, M. and Ringe, J.: Delayed release of chemokine {CCL25} with bioresorbable microparticles for mobilization of human mesenchymal stem cells. In: Acta Biomaterialia, 69, 2018, 290--300
2018Bekheet, M.F. and Schlicker, L. and Doran, A. and Siemensmeyer, K. and Gurlo, A.: Ferrimagnetism in manganese-rich gallium and aluminium spinels due to mixed valence {Mn2}+-{Mn3}+ states. In: Dalton Transactions, 47, 2018, 2727--2738
2018Götsch, T. and Ploner, K. and Bernardi, J. and Schlicker, L. and Gili, A. and Doran, A. and Gurlo, A. and Penner, S.: Formation of {Pd}-{Ce} intermetallic compounds by reductive metal-support interaction. In: Journal of Solid State Chemistry, 265, 2018, 176--183
2018Grünbacher, M. and Schlicker, L. and Bekheet, M.F. and Gurlo, A. and Klötzer, B. and Penner, S.: H2 reduction of {Gd}- and {Sm}-doped ceria compared to pure {CeO2} at high temperatures: {Effect} on structure, oxygen nonstoichiometry, hydrogen solubility and hydroxyl chemistry. In: Physical Chemistry Chemical Physics, 20, 2018, 22099--22113
2018Schlicker, L. and Bekheet, M.F. and Gili, A. and Doran, A. and Gurlo, A. and Ploner, K. and Schachinger, T. and Penner, S.: Hydrogen reduction and metal-support interaction in a metastable metal-oxide system: {Pd} on rhombohedral {In2O3}. In: Journal of Solid State Chemistry, 266, 2018, 93--99
2018Bensalah, H. and Bekheet, M.F. and Alami Younssi, S. and Ouammou, M. and Gurlo, A.: Hydrothermal synthesis of nanocrystalline hydroxyapatite from phosphogypsum waste. In: Journal of Environmental Chemical Engineering, 6, 2018, 1347--1352
2018Fleischer, V. and Simon, U. and Parishan, S. and Colmenares, M.G. and Görke, O. and Gurlo, A. and Riedel, W. and Thum, L. and Schmidt, J. and Risse, T. and Dinse, K.-P. and Schomäcker, R.: Investigation of the role of the {Na2WO4}/{Mn}/{SiO2} catalyst composition in the oxidative coupling of methane by chemical looping experiments. In: Journal of Catalysis, 360, 2018, 102--117
2018Sparks, T.D. and Gurlo, A. and Gaultois, M.W. and Clarke, D.R.: Revised model for thermopower and site inversion in {Co3} {O4} spinel. In: Physical Review B, 98, 2018,
2018Götsch, T. and Schlicker, L. and Bekheet, M.F. and Doran, A. and Grünbacher, M. and Praty, C. and Tada, M. and Matsui, H. and Ishiguro, N. and Gurlo, A. and Klötzer, B. and Penner, S.: Structural investigations of {La0}.{6Sr0}.{4FeO3}-:δ under reducing conditions: {Kinetic} and thermodynamic limitations for phase transformations and iron exsolution phenomena. In: RSC Advances, 8, 2018, 3120--3131
2018Soltani, N. and Bahrami, A. and Pech-Canul, M.I. and González, L.A. and Gurlo, A.: Surface modification of rice-husk ash ({RHA}) by {Si3N4} coating to promote its wetting by {Al}-{Mg}-{Si} alloys. In: Materials Chemistry and Physics, 203, 2018, 223--234
2018Gili, A. and Schlicker, L. and Bekheet, M.F. and Görke, O. and Penner, S. and Grünbacher, M. and Götsch, T. and Littlewood, P. and Marks, T.J. and Stair, P.C. and Schomäcker, R. and Doran, A. and Selve, S. and Simon, U. and Gurlo, A.: Surface {Carbon} as a {Reactive} {Intermediate} in {Dry} {Reforming} of {Methane} to {Syngas} on a 5% {Ni}/{MnO} {Catalyst}. In: ACS Catalysis, 8, 2018, 8739--8750
2018Colmenares, M.G. and Simon, U. and Schmidt, F. and Dey, S. and Schmidt, J. and Thomas, A. and Gurlo, A.: Tailoring of ordered mesoporous silica {COK}-12: {Room} temperature synthesis of mesocellular foam and multilamellar vesicles. In: Microporous and Mesoporous Materials, 267, 2018, 142--149
2018Karl, D. and Kamutzki, F. and Zocca, A. and Goerke, O. and Guenster, J. and Gurlo, A.: Towards the colonization of {Mars} by in-situ resource utilization: {Slip} cast ceramics from {Martian} soil simulant. In: PLoS ONE, 13, 2018,
2018Schlicker, L. and Doran, A. and Schneppmüller, P. and Gili, A. and Czasny, M. and Penner, S. and Gurlo, A.: Transmission in situ and operando high temperature {X}-ray powder diffraction in variable gaseous environments. In: Review of Scientific Instruments, 89, 2018,
2018Köpfle, N. and Götsch, T. and Grünbacher, M. and Carbonio, E.A. and Hävecker, M. and Knop-Gericke, A. and Schlicker, L. and Doran, A. and Kober, D. and Gurlo, A. and Penner, S. and Klötzer, B.: Zirconium-{Assisted} {Activation} of {Palladium} {To} {Boost} {Syngas} {Production} by {Methane} {Dry} {Reforming}. In: Angewandte Chemie - International Edition, 57, 2018, 14613--14618
2017Doran, A. and Schlicker, L. and Beavers, C.M. and Bhat, S. and Bekheet, M.F. and Gurlo, A.: Compact low power infrared tube furnace for in situ {X}-ray powder diffraction. In: Review of Scientific Instruments, 88, 2017,
2017Bahrami, A. and Simon, U. and Soltani, N. and Zavareh, S. and Schmidt, J. and Pech-Canul, M.I. and Gurlo, A.: Eco-fabrication of hierarchical porous silica monoliths by ice-templating of rice husk ash. In: Green Chemistry, 19, 2017, 188--195
2017Soltani, N. and Soltani, S. and Bahrami, A. and Pech-Canul, M.I. and Gonzalez, L.A. and Möller, A. and Tapp, J. and Gurlo, A.: Electrical and thermomechanical properties of {CVI}- {Si3N4porous} rice husk ash infiltrated by {Al}-{Mg}-{Si} alloys. In: Journal of Alloys and Compounds, 696, 2017, 856--868
2017Kaspar, J. and Bazarjani, M.S. and Schitco, C. and Gurlo, A. and Graczyk-Zajac, M. and Riedel, R.: Electrochemical study of {NiO} nanosheets: toward the understanding of capacity fading. In: Journal of Materials Science, 52, 2017, 6498--6505
2017Hojamberdiev, M. and Bekheet, M.F. and Hart, J.N. and Vequizo, J.J.M. and Yamakata, A. and Yubuta, K. and Gurlo, A. and Hasegawa, M. and Domen, K. and Teshima, K.: Elucidating the impact of {A}-site cation change on photocatalytic {H2} and {O2} evolution activities of perovskite-type {LnTaON2} ({Ln} = la and {Pr}). In: Physical Chemistry Chemical Physics, 19, 2017, 22210--22220
2017Hojamberdiev, M. and Kawashima, K. and Kumar, M. and Yamakata, A. and Yubuta, K. and Gurlo, A. and Hasegawa, M. and Domen, K. and Teshima, K.: Engaging the flux-grown {La1}−{xSrxFe1}−{yTiyO3} crystals in visible-light-driven photocatalytic hydrogen generation. In: International Journal of Hydrogen Energy, 42, 2017, 27024--27033
2017Götsch, T. and Praty, C. and Grünbacher, M. and Schlicker, L. and Bekheet, M.F. and Doran, A. and Gurlo, A. and Tada, M. and Matsui, H. and Ishiguro, N. and Klötzer, B. and Penner, S.: Iron exsolution phenomena in lanthanum strontium ferrite {SOFC} anodes. . 2017. 1327--1341
2017Soltani, N. and Bahrami, A. and Pech-Canul, M.I. and González, L.A. and Gurlo, A.: Kinetics of {Silicon} {Nitride} {Formation} on {SiO2}-{Derived} {Rice} {Husk} {Ash} {Using} the {Chemical} {Vapor} {Infiltration} {Method}. In: International Journal of Chemical Kinetics, 49, 2017, 293--302
2017Soltani, N. and Simon, U. and Bahrami, A. and Wang, X. and Selve, S. and Epping, J.D. and Pech-Canul, M.I. and Bekheet, M.F. and Gurlo, A.: Macroporous polymer-derived {SiO2}/{SiOC} monoliths freeze-cast from polysiloxane and amorphous silica derived from rice husk. In: Journal of the European Ceramic Society, 37, 2017, 4809--4820
2017Henning, L.M. and Zavareh, S. and Kamm, P.H. and Höner, M. and Fischer, H. and Banhart, J. and Schmidt, F. and Gurlo, A.: Manufacturing and {Characterization} of {Highly} {Porous} {Bioactive} {Glass} {Composite} {Scaffolds} {Using} {Unidirectional} {Freeze} {Casting}. In: Advanced Engineering Materials, 19, 2017,
2017Bahrami, A. and Soltani, N. and Soltani, S. and Pech-Canul, M.I. and Gonzalez, L.A. and Gutierrez, C.A. and Möller, A. and Tapp, J. and Gurlo, A.: Mechanical, thermal and electrical properties of monolayer and bilayer graded {Al}/{SiC}/rice husk ash ({RHA}) composite. In: Journal of Alloys and Compounds, 699, 2017, 308--322
2017Bensalah, H. and Bekheet, M.F. and Younssi, S.A. and Ouammou, M. and Gurlo, A.: Removal of cationic and anionic textile dyes with {Moroccan} natural phosphate. In: Journal of Environmental Chemical Engineering, 5, 2017, 2189--2199
2017Prasad, R.M. and Lauterbach, S. and Kleebe, H.-J. and Merdrignac-Conanec, O. and Barsan, N. and Weimar, U. and Gurlo, A.: Response of {Gallium} {Nitride} {Chemiresistors} to {Carbon} {Monoxide} is {Due} to {Oxygen} {Contamination}. In: ACS Sensors, 2, 2017, 713--717
2017Schlicker, L. and Bekheet, M.F. and Gurlo, A.: Scaled-up solvothermal synthesis of nanosized metastable indium oxyhydroxide ({InOOH}) and corundum-type rhombohedral indium oxide (rh-{In2O3}). In: Zeitschrift fur Kristallographie - Crystalline Materials, 232, 2017, 129--140
2017Köck, E.-M. and Kogler, M. and Zhuo, C. and Schlicker, L. and Bekheet, M.F. and Doran, A. and Gurlo, A. and Penner, S.: Surface chemistry and stability of metastable corundum-type {In2O3}. In: Physical Chemistry Chemical Physics, 19, 2017, 19407--19419
2017Köck, E.-M. and Kogler, M. and Götsch, T. and Schlicker, L. and Bekheet, M.F. and Doran, A. and Gurlo, A. and Klötzer, B. and Petermüller, B. and Schildhammer, D. and Yigit, N. and Penner, S.: Surface chemistry of pure tetragonal {ZrO2} and gas-phase dependence of the tetragonal-to-monoclinic {ZrO2} transformation. In: Dalton Transactions, 46, 2017, 4554--4570
2017Bahrami, A. and Pech-Canul, M.I. and Soltani, N. and Gutiérrez, C.A. and Kamm, P.H. and Gurlo, A.: Tailoring microstructure and properties of bilayer-graded {Al}/{B4C}/{MgAl2O4composites} by single-stage pressureless infiltration. In: Journal of Alloys and Compounds, 694, 2017, 408--418
2017Bahrami, A. and Soltani, N. and Soltani, S. and Pech-Canul, M.I. and Gutiérrez, C.A. and González, L.A. and Möller, A. and Tapp, J. and Gurlo, A.: Thermal and electrical properties of bilayer {Al}/{B4C}/{Rice} husk ash composite. . 2017. 1188--1194
2016De Boer, T. and Bekheet, M.F. and Gurlo, A. and Riedel, R. and Moewes, A.: Band gap and electronic structure of cubic, rhombohedral, and orthorhombic {In2} {O3} polymorphs: {Experiment} and theory. In: Physical Review B, 93, 2016,
2016Zavareh, S. and Hilger, A. and Hirselandt, K. and Goerke, O. and Manke, I. and Banhart, J. and Gurlo, A.: Fabrication of cellular and lamellar {LiFePO4}/{C} {Cathodes} for {Li}-ion batteries by unidirectional freeze-casting method. In: Journal of the Ceramic Society of Japan, 124, 2016, 1067--1071
2016Bekheet, M.F. and Svoboda, I. and Liu, N. and Bayarjargal, L. and Irran, E. and Dietz, C. and Stark, R.W. and Riedel, R. and Gurlo, A.: Ferroelectric {InMnO3}: {Growth} of single crystals, structure and high-temperature phase transitions. In: Journal of Solid State Chemistry, 241, 2016, 54--63
2016Garcia, Y. and Su, B.-L. and Bach, S. and Visnow, E. and Panthöfer, M. and Gorelik, T. and Buzanich, A.G. and Gurlo, A. and Kolb, U. and Emmerling, F. and Lind, C. and Tremel, W.: Hydrate {Networks} under {Mechanical} {Stress} - {A} {Case} {Study} for {Co3}({PO4})2·{8H2O}. In: European Journal of Inorganic Chemistry, 2016, 2016, 2072--2081
2016Prasad, R.M. and Jüttke, Y. and Richter, H. and Voigt, I. and Riedel, R. and Gurlo, A.: Mechanism of gas separation through amorphous silicon oxycarbide membranes. In: Advanced Engineering Materials, 18, 2016, 721--727
2016Köck, E.-M. and Kogler, M. and Grünbacher, M. and Zhuo, C. and Thalinger, R. and Schmidmair, D. and Schlicker, L. and Gurlo, A. and Penner, S.: Metastable {Corundum}-{Type} {In2O3}: {Phase} {Stability}, {Reduction} {Properties}, and {Catalytic} {Characterization}. In: Journal of Physical Chemistry C, 120, 2016, 15272--15281
2016Hojamberdiev, M. and Bekheet, M.F. and Zahedi, E. and Wagata, H. and Kamei, Y. and Yubuta, K. and Gurlo, A. and Matsushita, N. and Domen, K. and Teshima, K.: New {Dion}-{Jacobson} {Phase} {Three}-{Layer} {Perovskite} {CsBa2Ta3O10} and {Its} {Conversion} to {Nitrided} {Ba2Ta3O10} {Nanosheets} via a {Nitridation}-{Protonation}-{Intercalation}-{Exfoliation} {Route} for {Water} {Splitting}. In: Crystal Growth and Design, 16, 2016, 2302--2308
2016Colmenares, M.G. and Simon, U. and Yildiz, M. and Arndt, S. and Schomaecker, R. and Thomas, A. and Rosowski, F. and Gurlo, A. and Goerke, O.: Oxidative coupling of methane on the {Na2WO4}-{MnxOy} catalyst: {COK}-12 as an inexpensive alternative to {SBA}-15. In: Catalysis Communications, 85, 2016, 75--78
2016Soltani, N. and Simon, U. and Bahrami, A. and Zavareh, S. and Görke, O. and Pech-Canul, M.I. and Gurlo, A.: Porous silicon oxycarbide composites with aligned macro porosity from water-based slurry by freezecasting process. . 2016. 915--919
2016Schiţco, C. and Turdean-Ionescu, C. and Bazarjani, M.S. and Tai, C.-W. and Li, D. and Fasel, C. and Donner, W. and Shen, J. and Riedel, R. and Gurlo, A. and Edén, M.: Silicon oxycarbonitrides synthesized by ammonia-assisted thermolysis route from polymers: {A} total {X}-ray scattering, solid-state {NMR}, and {TEM} structural study. In: Journal of the European Ceramic Society, 36, 2016, 979--989
2016Hojamberdiev, M. and Bekheet, M.F. and Zahedi, E. and Wagata, H. and Vequizo, J.J.M. and Yamakata, A. and Yubuta, K. and Gurlo, A. and Domen, K. and Teshima, K.: The contrasting effect of the {Ta}/{Nb} ratio in (111)-layered {B}-site deficient hexagonal perovskite {Ba5Nb4}-: {XTaxO15} crystals on visible-light-induced photocatalytic water oxidation activity of their oxynitride derivatives. In: Dalton Transactions, 45, 2016, 12559--12568
2016Gurlo, A. and Ionescu, E. and Riedel, R. and Clarke, D.R.: The {Thermal} {Conductivity} of {Polymer}-{Derived} {Amorphous} {Si}-{O}-{C} {Compounds} and {Nano}-{Composites}. In: Journal of the American Ceramic Society, 99, 2016, 281--285
2015Li, W. and Li, D. and Gao, X. and Gurlo, A. and Zander, S. and Jones, P. and Navrotsky, A. and Shen, Z. and Riedel, R. and Ionescu, E.: A study on the thermal conversion of scheelite-type {ABO4} into perovskite-type {AB}({O},{N})3. In: Dalton Transactions, 44, 2015, 8238--8246
2015Bekheet, M.F. and Dubrovinsky, L. and Gurlo, A.: Compressibility and structural stability of spinel-type {MnIn2O4}. In: Journal of Solid State Chemistry, 230, 2015, 301--308
2015Bekheet, M.F. and Schwarz, M.R. and Kroll, P. and Gurlo, A.: Kinetic control in the synthesis of metastable polymorphs: {Bixbyite}-to-{Rh2O3}({II})-to-corundum transition in {In2O3}. In: Journal of Solid State Chemistry, 229, 2015, 278--286
2015Li, W. and Gurlo, A. and Riedel, R. and Ionescu, E.: Perovskite-type solid solution {SrMo1}-{xWx}({O}, {N})3 oxynitrides: {Synthesis}, structure, and magnetic properties. In: Zeitschrift fur Anorganische und Allgemeine Chemie, 641, 2015, 1533--1539
2015Li, W. and Li, D. and Gurlo, A. and Shen, Z. and Riedel, R. and Ionescu, E.: Synthesis and rapid sintering of dense {SrA}({O},{N})3 ({A}={Mo}, {W}) oxynitride ceramics. In: Journal of the European Ceramic Society, 35, 2015, 3273--3281
2015Schitco, C. and Seifollahi Bazarjani, M. and Riedel, R. and Gurlo, A.: Ultramicroporous silicon nitride ceramics for {CO2} capture. In: Journal of Materials Research, 30, 2015, 2958--2966
2015Schitco, C. and Bazarjani, M.S. and Riedel, R. and Gurlo, A.: {NH3}-assisted synthesis of microporous silicon oxycarbonitride ceramics from preceramic polymers: {A} combined {N2} and {CO2} adsorption and small angle {X}-ray scattering study. In: Journal of Materials Chemistry A, 3, 2015, 805--818
2014Ruzimuradov, O. and Nurmanov, S. and Hojamberdiev, M. and Prasad, R.M. and Gurlo, A. and Broetz, J. and Nakanishi, K. and Riedel, R.: Fabrication of nitrogen-doped {TiO2} monolith with well-defined macroporous and bicrystalline framework and its photocatalytic performance under visible light. In: Journal of the European Ceramic Society, 34, 2014, 809--816
2014Seifollahi Bazarjani, M. and Müller, M.M. and Kleebe, H.-J. and Jüttke, Y. and Voigt, I. and Baghaie Yazdi, M. and Alff, L. and Riedel, R. and Gurlo, A.: High-temperature stability and saturation magnetization of superparamagnetic nickel nanoparticles in microporous polysilazane-derived ceramics and their gas permeation properties. In: ACS Applied Materials and Interfaces, 6, 2014, 12270--12278
2014Renard, L. and Brötz, J. and Fuess, H. and Gurlo, A. and Riedel, R. and Toupance, T.: Hybrid organotin and tin oxide-based thin films processed from alkynylorganotins: {Synthesis}, characterization, and gas sensing properties. In: ACS Applied Materials and Interfaces, 6, 2014, 17093--17101
2014Bazarjani, M.S. and Müller, M.M. and Kleebe, H.-J. and Fasel, C. and Riedel, R. and Gurlo, A.: In situ formation of tungsten oxycarbide, tungsten carbide and tungsten nitride nanoparticles in micro- and mesoporous polymer-derived ceramics. In: Journal of Materials Chemistry A, 2, 2014, 10454--10464
2014Nikolaenko, Y.M. and Kuzovlev, Y.E. and Medvedev, Y.V. and Mezin, N.I. and Fasel, C. and Gurlo, A. and Schlicker, L. and Bayer, T.J.M. and Genenko, Y.A.: Macro- and microscopic properties of strontium doped indium oxide. In: Journal of Applied Physics, 116, 2014,
2014Ruzimuradov, O. and Nurmanov, S. and Hojamberdiev, M. and Prasad, R.M. and Gurlo, A. and Broetz, J. and Nakanishi, K. and Riedel, R.: Preparation and characterization of macroporous {TiO2}-{SrTiO} 3 heterostructured monolithic photocatalyst. In: Materials Letters, 116, 2014, 353--355
2013Li, W. and Ionescu, E. and Riedel, R. and Gurlo, A.: Can we predict the formability of perovskite oxynitrides from tolerance and octahedral factors?. In: Journal of Materials Chemistry A, 1, 2013, 12239--12245
2013Gurlo, A.: Ceramic {Gas} {Sensors}. Ceramics {Science} and {Technology}, {Applications}. 2013. 447--470
2013Gurlo, A.: Ceramic {Gas} {Sensors}. Ceramics {Science} and {Technology}. 2013. 447--470
2013Bekheet, M.F. and Schwarz, M.R. and Lauterbach, S. and Kleebe, H.-J. and Kroll, P. and Stewart, A. and Kolb, U. and Riedel, R. and Gurlo, A.: In situ high pressure high temperature experiments in multi-anvil assemblies with bixbyite-type {In2} {O3} and synthesis of corundum-type and orthorhombic {In2} {O3} polymorphs. In: High Pressure Research, 33, 2013, 697--711
2013Miehe, G. and Lauterbach, S. and Kleebe, H.-J. and Gurlo, A.: Indium hydroxide to oxide decomposition observed in one nanocrystal during in situ transmission electron microscopy studies. In: Journal of Solid State Chemistry, 198, 2013, 364--370
2013Pashchanka, M. and Prasad, R.M. and Hoffmann, R.C. and Gurlo, A. and Schneider, J.J.: Inkjet-printed nanoscaled {CuO} for miniaturized gas-sensing devices. In: European Journal of Inorganic Chemistry, 2013, 1481--1487
2013Gurlo, A.: Insights into the mechanism of gas sensor operation. Metal {Oxide} {Nanomaterials} for {Chemical} {Sensors}. 2013. 3--34
2013Sänze, S. and Gurlo, A. and Hess, C.: Monitoring gas sensors at work: {Operando} {Raman}-{FTIR} study of ethanol detection by indium oxide. In: Angewandte Chemie - International Edition, 52, 2013, 3607--3610
2013Bekheet, M.F. and Schwarz, M.R. and Lauterbach, S. and Kleebe, H.-J. and Kroll, P. and Riedel, R. and Gurlo, A.: Orthorhombic {In2O3}: {A} metastable polymorph of indium sesquioxide. In: Angewandte Chemie - International Edition, 52, 2013, 6531--6535
2013Bekheet, M.F. and Schwarz, M.R. and Müller, M.M. and Lauterbach, S. and Kleebe, H.-J. and Riedel, R. and Gurlo, A.: Phase segregation in {Mn}-doped {In2O3}: {In} situ high-pressure high-temperature synchrotron studies in multi-anvil assemblies. In: RSC Advances, 3, 2013, 5357--5360
2013Jüttke, Y. and Richter, H. and Voigt, I. and Prasad, R.M. and Bazarjani, M.S. and Gurlo, A. and Riedel, R.: Polymer derived ceramic membranes for gas separation. . 2013. 1891--1896
2013Seifollahi Bazarjani, M. and Hojamberdiev, M. and Morita, K. and Zhu, G. and Cherkashinin, G. and Fasel, C. and Herrmann, T. and Breitzke, H. and Gurlo, A. and Riedel, R.: Visible light photocatalysis with c-{WO3}-x/{WO3}× {H2O} nanoheterostructures in situ formed in mesoporous polycarbosilane-siloxane polymer. In: Journal of the American Chemical Society, 135, 2013, 4467--4475
2012Sparks, T.D. and Gurlo, A. and Clarke, D.R.: Enhanced n-type thermopower in distortion-free {LiMn} {2O} 4. In: Journal of Materials Chemistry, 22, 2012, 4631--4636
2012Bekheet, M.F. and Miehe, G. and Fasel, C. and Gurlo, A. and Riedel, R.: Low temperature synthesis of nanocrystalline {MnIn} {2O} 4 spinel. In: Dalton Transactions, 41, 2012, 3374--3376
2012Renard, L. and Babot, O. and Saadaoui, H. and Fuess, H. and Brötz, J. and Gurlo, A. and Arveux, E. and Klein, A. and Toupance, T.: Nanoscaled tin dioxide films processed from organotin-based hybrid materials: {An} organometallic route toward metal oxide gas sensors. In: Nanoscale, 4, 2012, 6806--6813
2012Kayhan, E. and Prasad, R.M. and Gurlo, A. and Yilmazoglu, O. and Engstler, J. and Ionescu, E. and Yoon, S. and Weidenkaff, A. and Schneider, J.J.: Synthesis, characterization, electronic and gas-sensing properties towards {H} 2 and {CO} of transparent, large-area, low-layer graphene. In: Chemistry - A European Journal, 18, 2012, 14996--15003
2012Hojamberdiev, M. and Prasad, R.M. and Morita, K. and Zhu, Y. and Schiavon, M.A. and Gurlo, A. and Riedel, R.: Template-free synthesis of polymer-derived mesoporous {SiOC}/{TiO} 2 and {SiOC}/{N}-doped {TiO} 2 ceramic composites for application in the removal of organic dyes from contaminated water. In: Applied Catalysis B: Environmental, 115-116, 2012, 303--313
2012Prasad, R.M. and Mera, G. and Morita, K. and Müller, M. and Kleebe, H.-J. and Gurlo, A. and Fasel, C. and Riedel, R.: Thermal decomposition of carbon-rich polymer-derived silicon carbonitrides leading to ceramics with high specific surface area and tunable micro- and mesoporosity. In: Journal of the European Ceramic Society, 32, 2012, 477--484
2012Seifollahi Bazarjani, M. and Foro, S. and Donner, W. and Gurlo, A. and Riedel, R.: Trans-{Bis}(acetato-κ{O})bis(2-amino-ethanol-κ2 {N},{O})nickel({II}). In: Acta Crystallographica Section E: Structure Reports Online, 68, 2012, m567--m568
2011Pashchanka, M. and Hoffmann, R.C. and Gurlo, A. and Swarbrick, J.C. and Khanderi, J. and Engstler, J. and Issanin, A. and Schneider, J.J.: A molecular approach to {Cu} doped {ZnO} nanorods with tunable dopant content. In: Dalton Transactions, 40, 2011, 4307--4314
2011Gurlo, A. and Clarke, D.R.: High-sensitivity hydrogen detection: {Hydrogen}-induced swelling of multiple cracked palladium films on compliant substrates. In: Angewandte Chemie - International Edition, 50, 2011, 10130--10132
2011Renard, L. and Elhamzaoui, H. and Jousseaume, B. and Toupance, T. and Laurent, G. and Ribot, F. and Saadaoui, H. and Brötz, J. and Fuess, H. and Riedel, R. and Gurlo, A.: Low-temperature {H2} sensing in self-assembled organotin thin films. In: Chemical Communications, 47, 2011, 1464--1466
2011Seifollahi Bazarjani, M. and Kleebe, H.-J. and Müller, M.M. and Fasel, C. and Baghaie Yazdi, M. and Gurlo, A. and Riedel, R.: Nanoporous silicon oxycarbonitride ceramics derived from polysilazanes in situ modified with nickel nanoparticles. In: Chemistry of Materials, 23, 2011, 4112--4123
2011Gurlo, A.: Nanosensors: {Towards} morphological control of gas sensing activity. {SnO2}, {In2O3}, {ZnO} and {WO3} case studies. In: Nanoscale, 3, 2011, 154--165
2010Gurlo, A. and Riedel, R.: Active metal electrode-oxide interface in gas sensor operation probed by in situ and time-resolved {X}-ray spectroscopy. In: ChemPhysChem, 11, 2010, 79--82
2010Gurlo, A. and Riedel, R. and Grattage, J.: Characterization of metal electrode-sensing layer interface in sensors under operation. . 2010. 1354--1357
2010Riedel, R. and Gurlo, A. and Ionescu, E.: High-tech materials: {Synthesis} methods for ceramic materials. In: Chemie in Unserer Zeit, 44, 2010, 208--227
2010Prasad, R.M. and Gurlo, A. and Riedel, R. and Hübner, M. and Barsan, N. and Weimar, U.: Microporous ceramic coated {SnO2} sensors for hydrogen and carbon monoxide sensing in harsh reducing conditions. In: Sensors and Actuators, B: Chemical, 149, 2010, 105--109
2010Pashchanka, M. and Hoffmann, R.C. and Gurlo, A. and Schneider, J.J.: Molecular based, chimie douce approach to {0D} and {1D} indium oxide nanostructures. {Evaluation} of their sensing properties towards {CO} and {H} 2. In: Journal of Materials Chemistry, 20, 2010, 8311--8319
2010Prasad, R.M. and Iwamoto, Y. and Riedel, R. and Gurlo, A.: Multilayer amorphous-{Si}-{B}-{C}-{N}/γ-{Al2O3}/α- {Al2O3} membranes for hydrogen purification. In: Advanced Engineering Materials, 12, 2010, 522--528
2010Gurlo, A.: Nanosensors: {Does} crystal shape matter?. In: Small, 6, 2010, 2077--2079
2010Gurlo, A. and Dzivenko, D. and Andrade, M. and Riedel, R. and Lauterbach, S. and Kleebe, H.-J.: Pressure-induced decomposition of indium hydroxide. In: Journal of the American Chemical Society, 132, 2010, 12674--12678
2010Prasad, R.M. and Gurlo, A. and Riedel, R. and Hübner, M. and Barsan, N. and Weimar, U.: Sensing in harsh conditions: {How} to protect {SnO2} sensing layer. . 2010. 755--758
2010Gurlo, A.: Structural stability of high-pressure polymorphs in {In2O} 3 nanocrystals: {Evidence} of stress-induced transition?. In: Angewandte Chemie - International Edition, 49, 2010, 5610--5612
2009Schlicker, L. and Riedel, R. and Gurlo, A.: Indium hydroxide to bixbyite-type indium oxide transition probed in situ by time resolved synchrotron radiation. In: Nanotechnology, 20, 2009,
2009Gurlo, A. and Miehe, G. and Riedel, R.: Surfactant-free self-assembly route to hollow {In2O3} microspheres. In: Chemical Communications, 2009, 2747--2749
2009Khanderi, J. and Hoffmann, R.C. and Gurlo, A. and Schneider, J.J.: Synthesis and sensoric response of {ZnO} decorated carbon nanotubes. In: Journal of Materials Chemistry, 19, 2009, 5039--5046
2009Gurlo, A.: Toward nanos ensor technology: {Materials}, methods and mechanisms. . 2009. 545--552
2009Oprea, A. and Gurlo, A. and Bârsan, N. and Weimar, U.: Transport and gas sensing properties of {In2O3} nanocrystalline thick films: {A} {Hall} effect based approach. In: Sensors and Actuators, B: Chemical, 139, 2009, 322--328
2008Gurlo, A. and Dzivenko, D. and Kroll, P. and Riedel, R.: High-pressure high-temperature synthesis of {Rh2O} 3-{II}-type {in2O3} polymorph. In: Physica Status Solidi - Rapid Research Letters, 2, 2008, 269--271
2008Gurlo, A. and Kroll, P. and Riedel, R.: Metastability of corundum-type {in2O3}. In: Chemistry - A European Journal, 14, 2008, 3306--3310
2008Gurlo, A. and Lauterbach, S. and Miehe, G. and Kleebe, H.-J. and Riedel, R.: Nanocubes or nanorhombohedra? {Unusual} crystal shapes of corundum-type indium oxide. In: Journal of Physical Chemistry C, 112, 2008, 9209--9213
2008Gurlo, A. and Riedel, R.: Shape-, {Size}-and phase-controlled indium oxide for gas sensing. . 2008. 1505--1508
2007Gurlo, A. and Riedel, R.: In situ and operando spectroscopy for assessing mechanisms of gas sensing. In: Angewandte Chemie - International Edition, 46, 2007, 3826--3848
2006Sahm, T. and Gurlo, A. and Bârsan, N. and Weimar, U.: Basics of oxygen and {SnO2} interaction; work function change and conductivity measurements. In: Sensors and Actuators, B: Chemical, 118, 2006, 78--83
2006Mädler, L. and Roessler, A. and Pratsinis, S.E. and Sahm, T. and Gurlo, A. and Barsan, N. and Weimar, U.: Direct formation of highly porous gas-sensing films by in situ thermophoretic deposition of flame-made {Pt}/{SnO} 2 nanoparticles. In: Sensors and Actuators, B: Chemical, 114, 2006, 283--295
2006Gurlo, A.: Interplay between {O2} and {SnO2}: {Oxygen} ionosorption and spectroscopic evidence for adsorbed oxygen. In: ChemPhysChem, 7, 2006, 2041--2052
2006Graf, M. and Gurlo, A. and Bârsan, N. and Weimar, U. and Hierlemann, A.: Microfabricated gas sensor systems with sensitive nanocrystalline metal-oxide films. In: Journal of Nanoparticle Research, 8, 2006, 823--839
2006Sahm, T. and Gurlo, A. and Bârsan, N. and Weimar, U.: Properties of indium oxide semiconducting sensors deposited by different techniques. In: Particulate Science and Technology, 24, 2006, 441--452
2006Mädler, L. and Sahm, T. and Gurlo, A. and Grunwaldt, J.-D. and Barsan, N. and Weimar, U. and Pratsinis, S.E.: Sensing low concentrations of {CO} using flame-spray-made {Pt}/{SnO2} nanoparticles. In: Journal of Nanoparticle Research, 8, 2006, 783--796
2005Madler, L. and Roessler, A. and Pratsinis, S.E. and Sahm, T. and Gurlo, A. and Barsan, N. and Weimar, U.: Direct formation of highly porous gas-sensing films by in-situ thermophoretic deposition of flame-made {Pt}/{Sno2} nanoparticles. . 2005. 11946
2005Madler, L. and Roessler, A. and Pratsinis, S.E. and Sahm, T. and Gurlo, A. and Barsan, N. and Weimar, U.: Direct formation of highly porous gas-sensing films by in-situ thermophoretic deposition of flame-made {Pt}/{Sno2} nanoparticles. . 2005.
2005Mädler, L. and Pratsinis, S.E. and Sahm, T. and Gurlo, A. and Barsan, N. and Weimar, U.: Flame made nanoparticles for gas sensors. . 2005. 258--261
2005Sahm, T. and Mädler, L. and Gurlo, A. and Barsan, N. and Pratsinis, S.E. and Weimar, U.: Flame spray synthesis of tin oxide nanoparticles for gas sensing. . 2005. 19--24
2005Sahm, T. and Gurlo, A. and Bârsan, N. and Weimar, U. and Mädler, L.: Fundamental studies on {SnO2} by means of simultaneous work function change and conduction measurements. . 2005. 43--47
2005Röck, F. and Gurlo, A. and Weimar, U.: Multisensor system for characterization of packaging emissions: {Prediction} of total solvent amount and odor scores. In: Analytical Chemistry, 77, 2005, 2762--2769
2005Polleux, J. and Gurlo, A. and Barsan, N. and Weimar, U. and Antonietti, M. and Niederberger, M.: Template-free synthesis and assembly of single-crystalline tungsten oxide nanowires and their gas-sensing properties. In: Angewandte Chemie - International Edition, 45, 2005, 261--265
2004Gurlo, A. and Sahm, M. and Oprea, A. and Barsan, N. and Weimar, U.: A p- to n-transition on α-{Fe2O3}-based thick film sensors studied by conductance and work function change measurements. In: Sensors and Actuators, B: Chemical, 102, 2004, 291--298
2004Epifani, M. and Siciliano, P. and Gurlo, A. and Barsan, N. and Weimar, U.: Ambient {Pressure} {Synthesis} of {Corundum}-{Type} {In2O3}. In: Journal of the American Chemical Society, 126, 2004, 4078--4079
2004Gurlo, A. and Bârsan, N. and Oprea, A. and Sahm, M. and Sahm, T. and Weimar, U.: An n- to p-type conductivity transition induced by oxygen adsorption on α-{Fe2O3}. In: Applied Physics Letters, 85, 2004, 2280--2282
2004Sahm, T. and Mädler, L. and Gurlo, A. and Barsan, N. and Pratsinis, S.E. and Weimar, U.: Flame spray synthesis of tin dioxide nanoparticles for gas sensing. In: Sensors and Actuators, B: Chemical, 98, 2004, 148--153
2003Gurlo, A. and Ivanovskaya, M. and Barsan, N. and Weimar, U.: Corundum-type indium ({III}) oxide: {Formation} under ambient conditions in {Fe2O3}-{In2O3} system. In: Inorganic Chemistry Communications, 6, 2003, 569--572
2003Gurlo, A. and Barsan, N. and Weimar, U. and Ivanovskaya, M. and Taurino, A. and Siciliano, P.: Polycrystalline {Well}-{Shaped} {Blocks} of {Indium} {Oxide} {Obtained} by the {Sol}-{Gel} {Method} and {Their} {Gas}-{Sensing} {Properties}. In: Chemistry of Materials, 15, 2003, 4377--4383
2001Ivanovskaya, M. and Gurlo, A. and Bogdanov, P.: Mechanism of {O3} and {NO2} detection and selectivity of {In2O3} sensors. In: Sensors and Actuators, B: Chemical, 77, 2001, 264--267
1998Gurlo, A.Ch and Ivanovskaya, M.I.: Detection of oxidizing gases by thin-film semiconductor sensors based on {In2O3}. In: Russian Journal of Physical Chemistry A, 72, 1998, 299--302
1998Ivanovskaya, M.I. and Bogdanov, P.A. and Gurlo, A.Ch. and Ivashkevich, L.S.: Structural {Behavior} of {In2O3} {Prepared} by {Heat} {Treatment} of {Stabilized} {Sol}. In: Inorganic Materials, 34, 1998, 257--261
1998Gurlo, A.Ch. and Ivanovskaya, M.I.: Structure of {Molybdenum} {Trioxide} {Prepared} from {MoO3} · {H2O}. In: Inorganic Materials, 34, 1998, 1237--1239
1998Gurlo, A.Ch. and Ivanovskaya, M.I.: The detection of oxidizing gases by thin-film semiconductor sensors based on {In2O3}. In: Zhurnal Fizicheskoi Khimii, 72, 1998, 364--367
1998Gurlo, A. and Bârsan, N. and Ivanovskaya, M. and Weimar, U. and Göpel, W.: {In2O3} and {MoO3}-{In2O3} thin film semiconductor sensors: {Interaction} with {NO2} and {O3}. In: Sensors and Actuators, B: Chemical, 47, 1998, 92--99
1997Ivanovskaya, M.I. and Gurlo, A.Ch. and Lutynskaya, E.V. and Romanovskaya, V.V.: Effect of {Heat} {Treatment} {Conditions} on {Formation} of {Paramagnetic} {Centers} of {Molybdenum} in {MoO3}. In: Russian Journal of General Chemistry, 67, 1997, 1683--1688
1997Gurlo, A. and Ivanovskaya, M. and Bârsan, N. and Schweizer-Berberich, M. and Weimar, U. and Göpel, W. and Diéguez, A.: Grain size control in nanocrystalline {In2O3} semiconductor gas sensors. In: Sensors and Actuators, B: Chemical, 44, 1997, 327--333
1997Orlik, D.R. and Ivanovskaya, M.I. and Gurlo, A.Ch.: Properties of ceramic semiconductor sensors based on {SnO2}-{Sb2O3}. In: Journal of Analytical Chemistry, 52, 1997, 59--62
1997Wlodarski, Wojtek and Sun, Hong-Tao and Gurlo, Alexander and Gopel, Wolfgang: Sol-gel prepared {In} {2O} 3 thin films for ozone sensing. . 1997. 573--576
1997Gurlo, A. and Ivanovskaya, M. and Pfau, A. and Weimar, U. and Göpel, W.: Sol-gel prepared {in2O3} thin films. In: Thin Solid Films, 307, 1997, 288--293
1997Ivanovskaya, M.I. and Bogdanov, P.A. and Orlik, D.R. and Gurlo, A.Ch. and Romanovskaya, V.V.: Structure and properties of sol-gel obtained {SnO2} and {SnO2}-{Pd} films. In: Thin Solid Films, 296, 1997, 41--43